E61 Shower Screen 60 mm + Gasket 73×57×8 mm – Spot-Welded Mesh

Spot-Welded E61 Screen and Seal Set

This set pairs our spot-welded E61 screen, with its mesh fixed by a ring of weld points over a finely drilled plate, with a fresh 73 × 57 × 8 mm seal. The dense hole pattern gives a soft, even shower. It is a neat one-order refresh for a tired group.

Why fit them together

A new gasket against an old, dished screen may still leak, and a new screen behind a hard seal can rattle. Replacing both restores a flat, tight stack in the group. Allow ten minutes with the machine cool and the steam off.

Specifications

• E61 Spot-Welded Screen + Seal Kit Screen diameter: 60 mm
• E61 Spot-Welded Screen + Seal Kit Screen type: Spot-welded mesh, finely drilled plate
• E61 Spot-Welded Screen + Seal Kit Gasket size: 73 × 57 × 8 mm
• E61 Spot-Welded Screen + Seal Kit Group type: E61
• E61 Spot-Welded Screen + Seal Kit Contents: 1 screen, 1 gasket
• E61 Spot-Welded Screen + Seal Kit Supplier codes: PS1081516 + PS1186894

Machines it suits

Listed for Sanremo, Cimbali, Vibiemme, Bezzera, BFC, Brasilia and ECM E61 groups. Both parts can be bought singly too: see our spot-welded E61 screen and our 73×57×8 mm gasket.

Short on time? Our repair technicians can fit the screen and seal for you during a service.